LCD Display (16×2) With I2C Module || LCD With I2C

Name : LCD Display (16×2) With I2C Module || LCD With I2C

Net Quantity (N) : 1

This is LCD 1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on Liquid Crystal Display into your project.

The display is 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight.

This is great blue backlight LCD display. It is fantastic for Arduino based project.

This LCD1602 LCD Display is very easy to interface with Arduino or other Microcontrollers.

In this product, an I2C adapter is directly soldered right onto the pins of the display.

So all you need to connect are the I2C pins, which shows a good library and little of coding.

The I2C is a type of serial bus developed by Philips, which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line).

Both must be connected via pulled-up resistors.

The usage voltages are standard as 5V and 3.3V.

If you already have the I2C adapter soldered onto the board like in this product, the wiring is quite easy.

The LCD display works with 5 Volts. So we go for the 5V Pin.

The values shown on the display can be either a simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

Specifications : -

Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board

I2C adapter allows flexibility in connections

Country of Origin : India