Ultrasonic Mist Maker Humidifier, 5V Atomization Disc 108KHz Mist Atomizer DIY Humidifier with PCB, DIY Mist Atomizer Micro USB Board Ultrasonic Atomization Module for Home

Name : Ultrasonic Mist Maker Humidifier, 5V Atomization Disc 108KHz Mist Atomizer DIY Humidifier with PCB, DIY Mist Atomizer Micro USB Board Ultrasonic Atomization Module for Home

Coverage Area : Less Than 99 Sq Ft

Filter Type : Composite Filter

Type : Room

Product Breadth : 1 Cm

Product Height : 3 Cm

Product Length : 7 Cm

Net Quantity (N) : Pack Of 1

Specification : Item Type: Humidifier Module Working Voltage: DC 3.7-5.5V (5V Recommended) Working Current: 330mA Standing Current: 21uA Power Supply Interface: Type C USB Humidifier Interface: pH2.0 Terminal Frequency: 108kHz Multiple Function Modes: Uninterrupted Work Intermittent Work Timed Work Package List: 1 x TYPE C Atomizer or Humidifier Controller 1 x Atomizing Film 1 x Humidifier Cotton Swab. How to Use It - 1.Charge it with an USB power cord. 2. Place the atomizer on a shallow surface or sponge in water. Note that the welding surface of the atomizer plate faces upwards. 3. Press the key to start it. Then Enjoy Your Soft Moist Air. High spray level -- Ultrasonic humidifier can cover the water surface well, absorbent sponge or towel for better effect with finer particles and higher spray level. Work Performance: Working time can be 2 to 8 hours, the spray volume of this atomization module can achieve 30 to 40ml per hour. With a low noise of less than 36DB. Easy to use -- Simple and easy-to-use atomizer drive, only need to sweep the frequency drive board to charge, then press the button to start. Application -- Ultrasonic mist maker is a humidifier DIY kit, which is widely used in atomization equipment such as USB humidifier, perfume atomizer, aromatherapy atomizer, etc. Work Voltage:DC 4.5V~5.0V, Work Temperature:0?~85?, Work Humidity:10%~90%RH

Country of Origin : India