4 Channel Wireless Four Button RF Remote Control Transceiver Module (Mode: Non Locking)

Name : 4 Channel Wireless Four Button RF Remote Control Transceiver Module (Mode: Non Locking)

Net Quantity (N) : 1

No. of the channel : 4

Operating mode : Non-Locking

Receiver Operating voltage : DC 5V.

Receiver sensitivity is : -98dB.

Transmitter Operating voltage : DC 12V

Transmitting frequency : 315 MHZ.

Transmitter Operating current : 10mA at 12V.

TransmitterRadiated power : 10mW at 12V.

Transmission distance (m) : 3 to 5.

The 4 Channel Wireless Four Button RF Remote Control Transmitter Receiver Module with Non-Locking mode can be composed of a fixed code four radio receiver circuits, remote control of four four-bit data output code corresponding to the module, you can easily make up a wireless remote control receiver circuit.

They are widely applied in the majority home electronics enthusiasts, industrial remote control electronic product design and development can be very good as a single-chip signal input source, especially for students and colleges electronic circuit design, the graduate design of the remote control circuit portion.

There are four buttons on the remote control and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3.

Press the buttons to transmit signals, the corresponding data bit is output high.

Caution : Take care while handling the receiver module, that the onboard copper coil (inductor) should be untouched. A little physical movement to the coil changes the inductance value which may cause the inappropriate circuit functi

Country of Origin : India