BITSKY INDIA 12V Peltier Module | 12706 Thermoelectric Peltier Cooler Module | Cooling Peltier Module - (Pack of 1)

Name : BITSKY INDIA 12V Peltier Module | 12706 Thermoelectric Peltier Cooler Module | Cooling Peltier Module - (Pack of 1)

Type : Science Toys & Kits

Recommended Age : Up to 12 months

Net Quantity (N) : 1

BITSKY INDIA Model : Tec1-12706, voltage(v): 12v vmax (v): 15.4v imax (a): 6a, qmax (w): 92w, max refrigerating power: 50-60w

Heating or cooling with the same module is possible simply by reversing polarity

Ideal for performance pc applications, tec1 peltier modules are tested to cool cpus and gpus to extreme temperatures when used in conjunction with 12v psu rails and optimized cpu heat sinks

It's recommended you use this device in conjunction with a heat sink to avoid being burned

Package content : 1 peltier

This cable is easiest way ever to connect to the serial console port of your microcontroller, pi or router. The usb connector contains a usb - serial converter chip and at the other end of the 90cm long cable are four header connectors : Red = power, black = ground, white = rx (to usb port) and green = tx (from usb port). The power connector provides 5v at 500ma directly from the usb port and the rx / tx connectors are 3.3v for interfacing with most 3.3v components. Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the raspberry pi or beaglebone black. Connect the pins as shown to power the pi or bbb and establish the rx/tx link. Then install the cp2102 drivers for windows/osx/linux drivers on your computer and connect with a terminal program at 115200 baud.

Country of Origin : India