Diamond Tester Machine || High Accuracy Diamond Tester Tool || Portable Diamond Selector With 9V Lithium Ion Battery || Gem Or Stone Tester Tool (Black)

Name : Diamond Tester Machine || High Accuracy Diamond Tester Tool || Portable Diamond Selector With 9V Lithium Ion Battery || Gem Or Stone Tester Tool (Black)

Material : Plastic

Type : Hand Tool Kits

Product Breadth : 10 Cm

Product Height : 1.5 Cm

Product Length : 18 Cm

Net Quantity (N) : Pack Of 1

MORRIS || Steps To Use Diamond Tester Machine

1. Put the 9V battery in. (included)

2. Take off the probe cap.

3. Turn on the switch, the power indicator is on.

4. Wait few seconds for the probe to heat up until another indicator is lighting up.

5. If you test diamond, you then need to turn on the number of lights corresponding to the indoor temperature and diamond weight.

6. If you test other gems, you'd better calibrate the probe before testing, Method : by placing the probe vertically on a piece of glass, then adjusting the light to 5, and then placing the probe on the gemstone to test.

Precautions

1. The surface of the test object is clean, flat and dry.

2. Don't wear gloves.

3. Don't detect metal.

4. Best to measure in no wind conditions.

5. The operating temperature is within the range of 5-35 degrees Celsius, and the humidity is below 80%.

6. When testing diamond, your right index finger must keep touching the metal panel on the back of the tester.

7. Please turn off the power after the test to save power.

How To Test Diamond

Turn on the switch,Make sure only 1 light is lighting up on the scale.Wait few seconds for the probe to heat up until Lamp on ready OK.Turn on the lights numbers corresponding to the indoor temperature and diamond weight.If don't know. Set 4 lights is lighting up on the scale.Start test diamond, no need to adjust the switch switch.Use the diamond d

Country of Origin : India