Indian LPG 1.5 Hose Pipe and High Pressure Adaptor Regulator With 2 Clamp

Name : Indian LPG 1.5 Hose Pipe and High Pressure Adaptor Regulator With 2 Clamp

Material : Metal

Type : Manual

Product Breadth : 10 Cm

Product Height : 10 Cm

Product Length : 10 Cm

Net Quantity (N) : Pack Of 3

Name : GENUINE LPG PARTS YELLOW HIGH PRESSURE ADOPTER REGULATOR, SURAKSHA HOSE PIPE WITH HOSE PIPE CLAMPS

Material : Metal

Type : Gas Stove Burner

Product Breadth : 10 Cm

Product Height : 10 Cm

Product Length : 10 Cm

Net Quantity (N) : Pack Of 4

GENUINE LPG PARTS YELLOW HIGH PRESSURE ADOPTER REGULATOR, SURAKSHA HOSE PIPE WITH HOSE PIPE CLAMPS .

Features

. Remove the regulator from the cylinder and hold it in one hand. Attach one end of the hose to the regulator with the other hand while rotating it on both sides.

. Fix the regulator onto the cylinder in such a way that there is no tension in the hose pipe.

. To remove the Hose Pipe, apply a little hot water on the end to be removed. Wait for 2 minutes and then move the hose back and forth slowly, but firmly. While removing, hold the nozzle tightly with the other hand to avoid nozzle breakage.

. Do not remove the hose pipe from the gas stove or regulator until it is absolutely necessary .

. After inserting the hose in the regulator, insert the hose into the nozzle of the gas stove by repeating the same procedure as above.

. Soak both ends of the pipe in hot water for two minutes.

1. This is the original ISI certified regulator which makes low consumption of gas, you can use it with single burner double burner triple burner 4 burner 5 burner kitchen hob top or gas geyser also the overall life of this regulator is 1

Country of Origin : India