Soil Moisture Sensor Kit Automatic Watering System Manager with Mini Water Pump for Arduino DIY Kit

Name : Soil Moisture Sensor Kit Automatic Watering System Manager with Mini Water Pump for Arduino DIY Kit

Net Quantity (N) : 100

Essential tool for connected gardening – Ideal for automatic plant watering systems. Monitor and control soil moisture – Reminds you when to water indoor plants and keeps track of garden soil moisture. Adjustable soil moisture threshold – Use the potentiometer to set the desired humidity level for automatic watering. Automatic watering function – Suitable for vegetable gardens, flower pots, or any indoor/outdoor plants. Great for frequent travelers – Ensures your plants are well-cared for, even when you're away.

Usage Instructions : Test Relay Module: Connect VCC to 5V, GND to ground, and IN to GND. Relay should make a "Kaka" sound as it activates and deactivates. When IN is suspended, the relay will stop.

Test Soil Moisture Sensor Module : Connect the fork probe to the transmitter using DuPont wires. Connect VCC to 5V, GND to ground. Power on: red power light stays on, green (or blue) light flashes once. Insert fork probe into soil or water – green (or blue) light should stay on. Connect the water pump: red wire to 5V, black wire to ground. Test pump: It should activate when humidity is detected and stop after 1 second (don’t run pump in the air for long).

System Setup : When everything is connected and powered on, if the pump works, the system is functioning correctly. Ensure proper installation of the probe in the soil, as it won’t detect humidity if not properly submerged.

Country of Origin : India